Pre-Shipment Production Video (PSPV): What STARGO Buyers Should Check

·

Pre-Shipment Production Video (PSPV): What STARGO Buyers Should Check

A pre-shipment production video (PSPV) shows your finished order at the factory before shipping. STARGO provides one for every container before the balance payment; here is what to check and how it complements third-party inspection.

Contents

  1. What is a pre-shipment production video (PSPV)?
  2. How does the PSPV tie to the balance payment?
  3. What should you check in the PSPV?
  4. How do you get the most useful pre-shipment production video?
  5. What is the difference between a PSPV and a third-party inspection?
  6. When should you add a third-party inspection to the PSPV?
  7. What should you do if the PSPV shows a problem?
  8. Frequently Asked Questions

Key Takeaways

  • A pre-shipment production video (PSPV) shows your finished order at the factory before shipping.
  • STARGO provides one for every container before the balance payment; here is what to check and how it complements third-party inspection.

A pre-shipment production video (PSPV) is a recording of your finished order, filmed at the factory before the container ships. STARGO provides a PSPV for every container before the balance payment, so the buyer can check models, quantities and packing against the proforma invoice and raise any issue while the goods are still at the factory.

Quick answer: A PSPV is a factory video of your finished order made before shipment. At STARGO, a PSPV is provided for every container before the balance payment, and you pay the balance only after reviewing it. Use it to check model, colour, quantity, battery, branding and packing against your proforma invoice. It complements, rather than replaces, an independent third-party inspection.

This article explains what the pre-shipment production video is, how it links to the balance payment, what to check frame by frame, and when to add a third-party inspection on top.

What is a pre-shipment production video (PSPV)?

It is a video record of the actual units built for your order, shown to you after production and before the balance is paid.

Photos of “similar” stock prove little. A PSPV shows your batch: the colours you ordered, the battery configuration you chose and the packaging you approved. For a buyer who cannot fly to Guangxi for every order, it is the last practical checkpoint before money and goods move. At STARGO, two-wheelers are assembled in Guigang and three-wheelers in Chongzuo, so a mixed order may involve footage from both sites; ask how the video for your container will be organised.

How does the PSPV tie to the balance payment?

The balance is paid after the buyer has reviewed the PSPV, which puts the buyer’s confirmation between finished production and the final payment.

The sequence in a STARGO order is: proforma invoice, deposit, production of 15–30 working days, depending on order quantity, PSPV, balance, loading, then documents. Because the video comes before the balance, the buyer still holds the remaining payment while checking the goods. That is the commercial value of the PSPV: a discrepancy found at this stage is fixed at the factory, not at your port.

Remember that payment timing and risk transfer are separate. The Incoterms® rule on your proforma invoice decides when risk in the goods passes to you; the ICC Incoterms® 2020 rules place that point at loading on board under FOB and CIF. The full payment flow is in the payment terms and PSPV order process guide, and the end-to-end sequence in our STARGO order process article.

What should you check in the PSPV?

Check everything that is written on your proforma invoice and visible from outside the carton: model, colour, quantity, battery, branding, accessories and packing.

Check itemWhat to look for in the videoCompare against
Model and variantBody style, lights, wheels, seat; e.g. JOVA vs a lookalikePI line items and approved sample
Colour splitCount by colour across the line-upPI colour breakdown
QuantityContinuous pan or count of units and cartonsPI total and packing list draft
BatteryChemistry and label (voltage, Ah), pack fitted or packed separatelyPI battery specification
BrandingLogo, decals, dashboard start screen, manualsApproved OEM artwork
IdentificationClose-ups of VIN or frame numbers on several unitsYour registration needs
AccessoriesCharger and plug type, mirrors, keys, tool kit, spare parts kitPI accessory list
PackingCarton condition, shipping marks, battery labels on cartonsYour marking instructions

For lithium-battery cartons, check that the outer marks match the shipping documents; see lithium battery shipping documents.

Video cameras on tripods set up for filming
Illustration: video cameras on tripods (a library picture, not STARGO filming). A PSPV is filmed before packing and records the finished units of your own container.

How do you get the most useful pre-shipment production video?

Agree a short shot list when you sign the proforma invoice, so the export team knows what your PSPV needs to show.

  1. List the details you need to see, for example colour counts, a battery label close-up and two VIN plates per model.
  2. Ask for a slow, continuous pan of the line-up so quantities can be counted without cuts.
  3. Request one unit shown powered on: lights, display, horn and throttle response on the stand.
  4. Ask for a few frames of cartons with shipping marks before or during loading.
  5. Name a reviewer on your side who can reply within 24–48 hours, so loading is not delayed.

Keep the video. It is useful evidence later, for example when a customs officer asks about markings or when you file a warranty claim and need to show the condition at dispatch.

What is the difference between a PSPV and a third-party inspection?

A PSPV is a factory-produced visual record reviewed remotely; a third-party inspection is an independent, hands-on check against a sampling plan.

AspectPSPVThird-party pre-shipment inspection
Who performs itFactory films; buyer reviewsIndependent inspector on site
What it provesYour batch exists, matches the PI visually, is packedDefect rate in a sample measured against an agreed limit
MethodVideo walkthroughSampling plan, function tests, measurements, report
Cost to buyerIncluded in the order processInspection fee paid to the agency
Best forEvery container, repeat ordersFirst orders, tenders, new OEM designs

Inspection agencies typically draw samples using ISO 2859-1, the international standard for sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection; its 2026 edition replaced the 1999 version. You agree the AQL levels for critical, major and minor defects before inspection. Our pre-shipment inspection checklist explains how to set them for electric two-wheelers.

When should you add a third-party inspection to the PSPV?

Add one when the cost of a defect is high relative to the inspection fee: first orders, tenders, new OEM designs and large containers.

  • First order with a new supplier: combine with factory verification; see factory verification.
  • Public or fleet tenders: the contract may require an independent report.
  • New OEM build: the first run of a custom colour or logo.
  • Repeat orders of a proven model: the PSPV alone is often enough once you trust the process.

A sample evaluation before the first bulk order catches design-level issues that neither the PSPV nor a sampling inspection is meant to find; see how to evaluate a sample before a bulk order. STARGO’s own process is described under quality control.

What should you do if the PSPV shows a problem?

Raise it before paying the balance, in writing, with timestamps and the matching line on the proforma invoice.

Be specific: “at 02:15, units 7–9 are red; PI line 3 specifies grey” gets a faster fix than “colours look wrong”. Agree the correction and ask for follow-up footage of the corrected units. Only then release the balance and confirm loading. Loading and container stuffing practice is described on container loading and shipping.

Frequently Asked Questions

What is a pre-shipment production video (PSPV)?

A PSPV is a video of your finished order filmed at the factory before shipment. STARGO provides one for every container before the balance payment, so you can compare the goods with your proforma invoice before releasing the remaining money.

When do I receive the PSPV in a STARGO order?

You receive it after production is finished and before the balance payment. Production runs 15–30 working days after the order is confirmed, depending on order quantity, so plan someone to review the video at the end of that window.

What should I check in a pre-shipment production video?

Check model, colour and quantity against the proforma invoice, the battery type and labels, your logo and packaging if customised, VIN or frame numbers on a few units, accessories such as chargers, and carton markings before loading.

Does the PSPV replace a third-party inspection?

No, it complements it. The PSPV is a visual record the buyer reviews remotely before paying the balance. A third-party inspection adds independent, hands-on sampling, typically using ISO 2859-1 acceptance plans, and is worth adding for first orders or tenders.

What if the PSPV shows a problem?

Raise it with the export team before you pay the balance. Describe the discrepancy with timestamps from the video, reference the line on your proforma invoice, and agree the correction and any follow-up footage in writing.

Is a PSPV provided for small orders too?

Yes. A PSPV is provided for every container, and the MOQ is 10 units per order, any model mix, so even a first pilot order follows the same video-before-balance sequence as a full container.

Want to see how a PSPV fits your next order? Ask the export team through the STARGO contact page or at sales@stargomoto.com, and include your shot-list requirements with your inquiry.

Entity note: STARGO is the export brand of Guangxi Xinli New Energy Technology Co., Ltd., which assembles two-wheelers in Guigang and three-wheelers in Chongzuo, Guangxi, China. A pre-shipment production video is provided for every STARGO container before the buyer pays the balance.

Related Articles

Work With STARGO

Questions about importing from STARGO?

Contact STARGO · Request Catalog

WhatsApp +86 187 7512 7878 · Typical response within 24 business hours